This heat pump dryer are specialized designed for hot room drying, provide suitable temperature to make plastics packages/films more flexible and increase its toughness.
This split type dryer is designed for hot room drying, one set can heat up a max 45cbm hot room. Split type design makes installation more convenient and flexible
for hot room drying, split type design makes installtion more easier
Split type
Air supply temperature：40-70℃
Application area＜45cbm
Air volume：2500-5500m3/h
Model：6P（fan power 1.5kW)
Electricty saving： 50%-70%
1. 50% electricity saving,high efficiency: compared with electric heater, Phnix heat pump curing room dryer can save 50% or more electricity
2.Split type, flexible installation: indoor+outdoor combined design makes installation more convenient
3.Max air supply temperature reach 70℃, stable hot air supply
4.Fan inside design: low noise makes factory cozy working environment
Heat sources | Coal | Electric Heater | Gas | Heat Pump |
Fuel type | Coal | Electricity | Gas | Electricity |
Burning value | 5500kcal/kwh | 860kcal/kwh | 8600kcal/m3 | 860kcal/kwh |
Heat efficiency | 30% | 95% | 80% | 350% |
Labor Cost | High | High | High | Low |
Safety | Low | Low | Low | High |
Pollution | Serious | no | yes | no |
Life span | 5-10years | 5-8years | 5-10years | 10-15years |
User's experience | Need special care, high pollution | High energy consumption， High capacitance pressure | Affected by gas supply high fuel cost | High efficiency, energy saving, clean and safe |
Guangdong PHNIX Eco-energy Solution Ltd.
Tel: +86-4009-4009-00
Address: NO.3 Tianyuan Road, Dagang Town,
Nansha, Guangzhou, Guangdong, PR. China.
